Cable Communicator is used for duplex voice communication two or more devices over one pair of metallic lead wires searchable using the built tone generator. The device is intended primarily for the telecommunications sector as a voice communication device searchable wires (numbering) in cables for a distance of approximately 8 kilometers. Finds use where it is necessary to establish a voice connection via cable, for example cable service crews, workers telecommunications, IT networks for various sports activities, etc.

This is a modernized model, which is equipped with a measuring RJ45 connector with implemented signaling LEDs. Measuring connector has a locking pin, which allow accidental disconnection. Input devices are treated restoring fuses against current surges. Suitcase Communicator is equipped with divider walls for accessories. Using orange nozzle it can be mounted for example on a wall of the car, wall, etc., Which is still on the eyes and does not take place on the ground. The device provides the ability to connect standard headphones with 3.5 mm jack connector. It is always supplied quality fitting headphones modern design with adjustable electret microphone, volume control options, including switching off the microphone. Headphones can be easily adapted for different head sizes and large foam ear pads prevent access ambient sound even busier environment. Twisted headphone cable enables easier handling during work. The presence of the clips on the carton Communicator offers easy attachment to clothing and thereby freeing both hands for measurement. The surface of the measuring cable is made of silicone insulation for easy handling, even in cold environments. The cable is terminated with banana quality. The device is powered by a 9V alkaline battery or a rechargeable battery NiCd. Operating time varies with quality alkaline batteries about 60 hours. When using a rechargeable battery operating time is at least 30 hours on a single charge. Low battery voltage highlights yellow LED. Also in this case it is possible to continue to work for several more hours. Line input and the generator is treated and surge current protection in case of connection leads to undue stress. It is thus achieved protection against voltage higher than 60V. If the current flow rises above 100 mA, then it will automatically disconnect the line input or generator. In the aftermath of overloading the circuits reconnected.

Only one piece, which can extend the set on a conference call with three or more participants. Can not be used separately!